01 Create/02 Print options/03 Order
3DnaKlik · Model studio
Bins & sorting trays.
Make it yours. We’ll bring it to life.
From your screen to your hands
MADE IN SLOVENIAYour model and colors go with you. See the price before ordering.
More export formats
Designed in your browser. When you request a price in the quote flow, the model is uploaded for printing. QR files contain the data you entered.
What is a custom drawer organizer?
A custom drawer organizer is a 3D printed tray with compartments made to the exact outer dimensions of your drawer, desk or shelf – no adapting, no dead space left by off-the-shelf inserts. In the generator you enter width, depth and height, choose 1–8 columns and rows of compartments, corner radius, wall, floor and divider thickness, finger scoops, a label ledge and floor holes. A stacking option adds a 1.6 mm rim and a matching groove underneath so trays sit on each other. Every compartment is at least 12 × 12 mm and 6 mm deep. PETG is the recommended material: it takes knocks and daily use.
What people make with it
- A kitchen or office drawer: cutlery, pens, cables, batteries, each in its own slot.
- A workshop: screws, nuts, drill bits and driver bits in stacked, labelled trays.
- Electronics and sewing: small parts that must not mix.
- A desk or shelf: one tray sized to the exact gap that was left empty.
Technical limits
- Size
- outer dimensions up to 220 × 220 mm, up to 256 mm tall; mm or inches
- Compartments
- 1–8 columns × 1–8 rows; at least 12 × 12 mm inside and 6 mm deep
- Walls
- independent wall, floor and divider thickness; stacking needs at least 3.6 mm
- Extras
- rounded corners, finger scoops, label ledge, floor holes, stacking rim with groove (0.25 mm clearance)
- Material
- PETG recommended; PLA for light items, ASA for a garage or balcony
- Not Gridfinity
- these are made-to-measure trays, not Gridfinity-compatible bins
Frequently asked questions
How much does a custom drawer organizer cost?
Designing and downloading the model is free and needs no account. When you click "Get a print quote", your 3MF goes through the same BambuStudio slicer as any uploaded file: the price comes from real material use and print time, the minimum is €4 per model, and no VAT is added. Printing takes 1–3 working days; shipping inside the EU starts at €13.90 and pickup in Slovenia is free. The default 120 × 90 × 30 mm PETG tray with six compartments comes to about €9.14 at current rates (65.8 g, 157 min); that is a worked example for that configuration, not a fixed price.
How do I measure my drawer?
Measure the inside width and depth of the drawer and the height to the rim, then subtract 1–2 mm of clearance from each. The values you enter are the outer dimensions of the tray.
Do the trays stack?
Yes, turn on stacking: the tray gets a 1.6 mm rim on top and a matching groove underneath with 0.25 mm clearance. Print one sample before a batch to confirm the fit for your filament.
Which material is best for an organizer?
PETG: it is tough, does not crack on impact and survives the heat in a car or garage. PLA is cheaper and fine for an office; ASA for outdoors.